5
°F/°C TEMPERATURE UNIT SETTING
The default temperature display is set to °F (degree Fahrenheit). To select °C (degree Celsius):
1.
The “°F or C” will flash.
2. Use the
+
key to toggle between “°C” and “°F”.
3. Once the desired temperature unit is selected, confirm with the
SET
key and exit the setting mode.
TO EXIT THE MANUAL SETTING MODE
To exit the manual setting mode anytime during the manual setting, wait for automatic timeout. The mode
will return to normal time display.
THE WEATHER FORECASTING ICONS
There are 3 weather icons in the top section of LCD which can be displayed in any of the following
combinations:
For every sudden or significant change in the air pressure, the weather icons will update accordingly to
represent the change in weather. If the icons do not change, then it means either the air pressure has not
changed or the change has been too slow for the Weather station to register. However, if the icon
displayed is a sun or raining cloud, there will be no change of icon if the weather gets any better (with
sunny icon) or worse (with rainy icon) since the icons are already at their extremes.
The icons display weather forecasts in terms of getting better or worse, and not necessarily sunny or
rainy as each icon indicates. For example, if the current weather is cloudy and the rainy icon is displayed,
it does not mean that the product is faulty because it is not raining. It simply means that the air pressure
has dropped and the weather is expected to get worse but not necessarily rainy.
Note:
After setting up, readings for weather forecasts should be disregarded for the next 48 hours. This will
allow sufficient time for the Weather Station to collect air pressure data at a constant altitude and
therefore result in a more accurate forecast.
Common to weather forecasting, absolute accuracy cannot be guaranteed. The weather forecasting
feature is estimated to have an accuracy level of about 75% due to the varying areas the Weather Station
has been designed for use in. In areas that experience sudden changes in weather (for example from
sunny to rain), the Weather Station will be more accurate compared to use in areas where the weather is
stagnant most of the time (for example mostly sunny).
If the weather station is moved to another location significantly higher or lower than its initial standing
point (for example from the ground floor to the upper floors of a house), remove the batteries and re-insert
them after about 30 seconds. By doing this, the Weather Station will not mistake the new location as
being a possible change in air-pressure when really it is due to the slight change of altitude. Again,
disregard weather forecasts for the next 48 hours as this will allow time for operation at a constant
altitude.
Rainy
Cloudy with sunny intervals
Sunny
Flashing
