
25
B. WALL MOUNTING
1.
Remove the table stand. To do this, pull down on the
stand from the rear and rotate forward.
2.
Fix a screw (not included) into the desired wall leaving
approximately 3/16 of an inch (5mm) extended from the
wall.
3.
Place the indoor weather station onto the screw using the
hanging hole on the backside.
4.
Gently pull the station down to lock the screw into place.
City Listing
(In order as they appear on left side of unit)
Montgomery, Alabama
Little Rock, Arkansas
Phoenix, Arizona
Los Angeles, California
San Francisco, California
Denver, Colorado
Washington D.C.
Jacksonville, Florida
Miami, Florida
Atlanta, Georgia
Des Moines, Iowa
Boise, Idaho
Chicago, Illinois
Kansas City, Kansas
New Orleans, Louisiana
Boston, Massachusetts
Portland, Maine
Detroit, Michigan
St. Paul, Minnesota
St. Louis, Missouri
Jackson, Mississippi
Helena, Montana
Raleigh, North Carolina
Bismarck, North Dakota
Omaha, Nebraska
Albuquerque, New Mexico
Las Vegas, Nevada
Reno, Nevada
New York City, New York
Cincinnati, Ohio
Oklahoma City, Oklahoma
Salem, Oregon
Philadelphia, Pennsylvania
Pittsburgh, Pennsylvania
Columbia, South Carolina
Pierre, South Dakota
Nashville, Tennessee
Dallas, Texas
San Antonio, Texas
Salt Lake City, Utah
Roanoke, Virginia
Seattle, Washington
Madison, Wisconsin
Charleston, West Virginia
Casper, Wyoming