background image

Model: W86111       www.lacrossetechnology.com/support                     

 pg. 9 

 

FCC STATEMENT 

 

This equipment has been tested and found to comply with the limits for a 

Class B digital device, pursuant to part 15 of the FCC Rules. These limits 

are designed to provide reasonable protection against harmful interference 
in a residential installation. This equipment generates, uses and can 

radiate radio frequency energy and, if not installed and used in accordance 

with the instructions, may cause harmful interference to radio 

communications. However, there is no guarantee that interference will not 

occur in a particular installation. If this equipment does cause harmful 

interference to radio or television reception, which can be determined by 

turning the equipment off and on, the user is encouraged to try to correct 

the interference by one or more of the following measures:  

 

Reorient or relocate the receiving antenna. 

 

Increase the separation between the equipment and receiver.  

 

Connect the equipment into an outlet on a circuit different from 
that to which the receiver is connected.  

 

Consult the dealer or an experienced radio/TV technician for help.  

This device must not be co-located or operating in conjunction with any 

other antenna or transmitter. 

  

Operation is subject to the following two conditions:  

(1) This device may not cause harmful interference, and  

(2) This device must accept any interference received, including 

interference that may cause undesired operation. 

 

Caution! 

 

The manufacturer is not responsible for any radio or TV interference 
caused by unauthorized modifications to this equipment. Such 

modifications could void the user authority to operate the equipment. 

 

All rights reserved. This manual may not be reproduced in any form, even 

in part, or duplicated or processed using electronic, mechanical or chemical 

process without the written permission of the publisher. This booklet may 

contain errors or misprints. The information it contains is regularly checked 

and corrections are included in subsequent editions. We disclaim any 

responsibility for any technical error or printing error, or their 

consequences. 

All trademarks and patents are recognized. 

 

Содержание 513-149










Отзывы: