La Crosse 513-1417CH Скачать руководство пользователя

Страница: 8 / 11

La Crosse Technology, Ltd. www.lacrossetechnology.com/support

Page 8

complete visibility of one side of the entire moon. After a full moon, the illuminated portion will decrease

or wane until the new moon occurs.



First Quarter and Last Quarter moons occur when the moon is at a 90 degree angle to the earth and

sun. We see half of the moon illuminated and the other half is in shadow.

Dashes, HH.H, LL.L or stuck Indoor Temperature

Explanation: These symbols are error messages indication the indoor sensor is outside of its readable

range. For indoor readings, this is generally a power related issue.



Batteries

may be overpowered or underpowered. Remove batteries from the atomic clock.



Press any button 20 times. Leave the atomic clock unpowered for 1-2 hours.



Install fresh Alkaline batteries with correct polarity.



If the indoor temperature is still shows dashes, HH.H or LL.L, the atomic clock may need replacement.

Inaccurate Indoor Temperature Reading

Explanation: When the indoor temperature is inaccurate, it is often due to the location of the display or

overpowered/under powered batteries. You can test the accuracy at you home.

Side-by-side test: Bring the remote sensor in the house and place it next to the atomic clock for 2 hours.



Compare indoor and remote temperature. The temperature should be within 4 degrees to be within

tolerance.



Look for heat sources such as sunlight, door or window frames or reflected heat or cold near the atomic

clock.

Set Time Alarm

Hold the ALARM button for 5 seconds to enter the alarm setting mode.

1. The alarm hour digit will flash in the time display.

2. Press and release the + or - buttons to select the hour.

3. Press and release the ALARM button to set the minutes.

4. The minute digits will flash.

5. Press and release the + or - buttons to adjust the minutes.

6. Confirm with the ALARM button and exit.

Activate/Deactivate time alarm



Press and release the ALARM button once to show alarm time.



Press and release the ALARM button to activate/deactivate the Alarm.



The bell icon will disappear when the alarm is no longer active.

Snooze Alarm



When the alarm sounds, press the LIGHT button to trigger snooze alarm for 10 minutes. The snooze

icon will flash when the snooze feature is active.



To stop alarm for one day, press ALARM button, while in snooze mode. The bell icon will remain solid.



Note: When the alarm sounds, it continues for 2 minutes and then shuts off completely.

Содержание 513-1417CH












Результаты поиска

Содержание 513-1417CH

Отзывы:

Похожие инструкции для 513-1417CH

Бренды по названию

Популярные бренды

La Crosse 513-1417CH, Часто задаваемые вопросы

Результаты поиска

Содержание 513-1417CH

Отзывы:

Похожие инструкции для 513-1417CH

Бренды по названию

Популярные бренды