Model: 308-1451
www.lacrossetechnology.com/support
8
Set Time Alarm 1
Press and release the ALARM button once to enter Alarm 1 mode. The Alarm Time and
A1
will show.
1. HOUR: Hold the ALARM button for 3 seconds. The Hour will flash. Use the + or - button to set the Hour. Be
sure to set the Hour correctly for AM or PM. Press and release the ALARM button once.
2. MINUTES: The Minutes will flash. Use the + or - button to set the Minutes. Press and release the ALARM
button once.
3. ACTIVATE: Press and release the ALARM button to enter the correct Alarm mode. Press and release the +
button and the alarm icon
will appear (above the time, alarm 1, below the time, alarm 2). The number in
the bell icon indicates which alarm is active.
4. DEACTIVATE: Press and release the ALARM button to enter the correct Alarm mode. Press and release
the
+
button and the alarm icon(s) will disappear indicating alarm 1 and/or alarm 2 is off.
Set Time Alarm 2
Press and release the ALARM button
twice
to enter Alarm 2 mode. The Alarm Time and
A2
will show. Follow
steps 1-4 above to program alarm 2.
Snooze
Press the SNOOZE/LIGHT button on the top of the forecast station once to activate the snooze feature for 10
minutes when either alarm sounds. The alarm icon
and the snooze icon
Zz
will flash when the snooze is
active. Press any button to deactivate the snooze feature.
Frost Alarm
The Frost Alarm when active will sound when the outdoor temperature drops to 34°F (1.1 °C).
1. ACTIVATE: Press and release the TEMP ALERT button to activate the Frost Alarm on all
channels (when multiple transmitters in use). The Frost Alarm icon will appear in the outdoor
temperature area when active.
2. DEACTIVATE: Press and release the TEMP ALERT
button until the Frost Alarm icon no longer shows.
Outdoor Temperature Alarms
A high and low outdoor temperature alarm may be set on the forecast station.
Note:
When multiple transmitters are connected on different channels, a high and/or low temperature alarms
may be set for each channel.
Set Temperature Alarm Channel 1
1. Press and release the CH button to select channel 1 (when multiple transmitters in use).
2. Hold the TEMP ALERT button until the
High
Temp Alert
icon
appears and the temperature
will flash. Use the
+
or
-
button to select your High Temp alarm value. Press and release the
SET button to move to the Low Temp alarm.
3. The
Low
Temp Alert
icon
will appear and the temperature will flash. Use the
+
or
-
button to
select your Low Temp alarm value. Press and release the SET button to confirm and exit to
current temperature.
4. The Temp Alert icon will show in the outdoor temperature area when a temperature alarm is active.
When the temperature alarm sounds, the Temp Alert icon
and the temperature value will flash. Press any
button to silence the alarm temporarily.
Set Temperature Alarm Channel 2 & 3
Use the CH button to select the channel. Follow steps 2-4 above to set temperature alarms on other channels.
Frost
Alert
icon
