Model: 308-1451
www.lacrossetechnology.com/support
11
MIN/MAX Data
The forecast station will show the daily minimum and maximum temperatures each day starting at midnight
(12:00 AM). The forecast station automatically resets the min/max temperatures at midnight (12:00 AM).
View MIN/MAX data:
Press and release the MAX/MIN button to view the Maximum, Minimum, then Current
Indoor and Outdoor Temperatures.
Multiple Transmitters:
Press and release the CH button to select the desired outdoor channel to view the
Minimum and Maximum Outdoor Temperatures. Press and release the MAX/MIN button to view the
Maximum, Minimum then Current Temperatures for that channel.
Reset all MIN/MAX data:
Hold the MAX/MIN button for 5 seconds and the Indoor and all Outdoor Minimum
and Maximum Temperatures will be reset manually to Current temperatures.
Channel Selection and Auto-scroll
Channels:
The forecast station can receive up to 3 outdoor transmitters. Extra TX142TH or TX14TH
sensors may be found online or at your retailer to monitor remote temperature in up to 3 locations within a
200 ft. wireless range of the forecast station. When more than one transmitter is used, set each transmitter
to a different channel number then hold the CH button for 5 second to search for the transmitters.
View Channels:
Press the CH button to select Ch1, Ch2, Ch3 or auto-channel scroll.
Auto scroll-channel
will show a circling arrow
below the channel number and will rotate
through each channel approximately every 5-8 seconds
Setup with Multiple Outdoor Transmitters
The forecast station will accommodate up to three remote outdoor transmitters (TX142TH or TX14TH). The
channel selection button allows you to easily see the temperature in various locations: outdoors, baby’s room,
greenhouse, basement, etc.
To connect multiple remote transmitters to the forecast station:
1. Remove the battery cover from all the transmitters (Leave battery covers off until all
transmitters are received by the forecast station).
2. Set the
first
outdoor transmitter to Channel 1 and insert 2 AA batteries.
3. Set the
second
outdoor transmitter to Channel 2 and insert 2 AA batteries.
4. Set the
third
outdoor transmitter to Channel 3 and insert 2 AA batteries.
5. Press and hold CH button on the forecast station for 5 seconds. The forecast station will
search for all outdoor transmitters.
6. Press the TX button on each outdoor transmitter to transmit RF signal.
7. When RF connection is established, the respective temperature & humidity for each of the
selected channels will appear on the main unit.
8. Allow the transmitters and the forecast station to stay 5-10 feet apart for 15 minutes to establish a solid
connection.
9. Install the battery covers on each sensor.
10.
After 15 minutes place the remote transmitters in appropriate locations (see “
position the outdoor
transmitter
”).
Press and release the CH button to view channel 1, 2 or 3 on the forecast station when multiple
transmitters are used.
Note:
You cannot change channels if only one transmitter is connected.
Channel Scroll
Press and release the CH button until you see
appear in the outdoor data area. The forecast station will
automatically rotate through the channels for all connected transmitters.
