Features of the Thermo-Hygro Sensor
The thermo-hygro sensor measures the outdoor temperature and
relative humidity. It also collects the readings from the rain and wind
sensors before transmitting the data to the base station by wireless
433MHz or by the 10 meter cable included in this set.
Features of Wind sensor
The wind sensor measures wind speed and wind direction and sends
the data to thermo-hygro sensor which in turn transmits the data to
the base station. Operating power is taken from the thermo-hygro
sensor using a 10 meter cable connection.
Features of Rain sensor
The rain sensor measures the rainfall and sends the data to thermo-
hygro sensor which in turn transmits the data to the base station.
Operating power is taken from the thermo-hygro sensor by a 10 meter
cable connection.
3. Safety Notes
•
Damage caused by failure to comply with this instruction manual will
invalidate any guarantee! The manufacturer and supplier will not be
held liable for actions due to failure to comply with this instruction
manual or from data inaccuracies that may occur with this product!
•
In case of harm or damage to a person or property caused by im-
proper handling or failure to comply with this instruction manual, the
manufacturer and supplier cannot be held liable.
•
For reasons of safety and operation, alterations to this device are
strictly prohibited.
•
To operate the weather station, use only supplied adaptor and batter-
ies of the recommended type.
•
Do not leave used-up batteries in the device as these may corrode
and release chemicals that may damage the unit.
•
Inserting batteries in an incorrect polarity will cause damage to this
product.
•
This product is not a toy kept out of the reach of children.
•
Do not depose new or used batteries to fire as they may explosion or
release dangerous chemicals.
•
This product is not to be used for medical purposes or for public
information.
4. Packaged Contents
Before setting up, carefully unpack the contents onto a table or flat
surface and check that the following are complete:
Item:
Consisting of:
Fittings:
Illustration:
Base
Station
•
Main unit
•
AD/DC 230V power
Adaptor - optional use
(included)
Thermo-
Hygro
Sensor
•
Main unit
•
Rain protection
cover
•
10 meter cable -
optional connection to
the base station (in-
cluded)
•
Wall mounting screws
•
Plastic anchors for
screws
Wind
Sensor
•
Main unit with
wind vane
•
10 meter cable
(already at-
tached to the
main unit)
•
Mast holder
•
2 x U-bolts for mast
holder
•
4 x Washers
•
4 x Nuts
•
1 x screw (to fix main
unit to the mast holder
Rain
Sensor
•
Main unit (base
and funnel)
•
10 meter cable
(already at-
tached to the
main unit)
Heavy
weather
PC
soft-
ware
CD-Rom format
(English, Ger-
man and French
languages only)
•
2 meter PC cable for
PC connection - op-
tional use (included)
