VIII. TIME
SETTING
There are two methods by which the time and date can be set:
A) Automatically via WWVB reception, or
B) Manually.
A. WWVB (Remote Control Time)
This method requires you to do nothing, except wait for the signal to be
received, and to select a time zone. Reception usually takes approximately 10
minutes during optimal conditions. The best condition for reception is at night,
between midnight and 6:00 am—when there is less atmospheric interference.
To keep your time as accurate as possible, the indoor weather station conducts
a WWVB search every night between these hours, and overrides any manually
set time. The WWVB tower icon (appearing in the TIME LCD) will flash
when a signal-search is in progress and a signal is being received, and will
remain steady when the signal has been received. If the WWVB time has not
been received after 10 minutes of battery installation, you may manually set
the time or leave the time function alone (reception will occur regardless).
B. MANUAL TIME SETTING
Note:
When in the 12-hour format “P.M” will appear to the left of the hour in
the time LCD between the hours of noon and midnight.
1.
Press and hold the
SET
button for 5 seconds.
2.
“LCD” will show in the time LCD and the number setting will flash.
3.
Press and release the
SET
button five times.
4.
The time will flash in the time LCD.
5.
Press and release the
IN
button to advance the hours.
6.
Press and release the
OUT
button to advance the minutes.
7.
Press and release the
SET
button to confirm and advance to the year
setting.
IX. SETTING THE YEAR, DAY AND MONTH
Note:
Reception of the WWVB signal will also set the date and day. The
reception of the signal will override any programmed date and day.
1.
Press and hold the
SET
button for 5 seconds.
2.
“LCD” will show in the time LCD and the number setting will flash.
3.
Press and release the
SET
button six times.
4.
The year will flash in the date LCD.
5.
Press and release the
IN
button to advance the year.
9
