background image

La Crosse Technology, Ltd.  

Page 7 

 

 

Mount the transmitter on the North side to prevent sun from causing incorrect 

readings.  

 

Mount at least 6 feet in the air for a strong signal. 

 

Outdoor transmitters are water resistant but not water proof.  

 

Avoid more than one wall between the transmitter and the forecast station. 

 

Do not mount near electrical wires, transmitting antennas or other items that 

will 

interfere

 with the signal. 

 

RF (radio frequency) signals do not travel well through moisture or dirt. 

 

Place the outdoor transmitter and the forecast station in the desired shaded 

locations, and wait approximately 1-hour before permanently mounting the 

transmitter to ensure that there is proper reception.  

 

Do not mount the transmitter on a metal fence. This significantly reduces the 

effective range. 

 

MOUNT 

 

Remove the mounting bracket from the outdoor temperature sensor . 

 

Place the mounting bracket over the desired shaded location (wall or table). 

 

Through the screw holes of the bracket, mark the mounting surface with a 

pencil. 

 

Screw mounting bracket onto the mounting surface.  Ensure that the screws are 

flush with the bracket. 

 

Insert the outdoor temperature sensor into the bracket. 

Note:  Mounting with adhesive tape is not recommended as a permanent 

mounting solution.  Only use the adhesive tape during set-up process. 

 

 

Position Forecast Station 

 

 

The Forecast station has pull out legs to sit on a desk or table, or it can hang on 

a wall.   

 

Choose a location 6 feet or more from electronics such as cordless phones, 

gaming systems, televisions, microwaves, routers, baby monitors, etc., which 

can prevent signal reception. 

 

Place withi

range

 of the outdoor transmitter.  

 

Be aware of electrical wires and plumbing within a wall. This will interfere with 

signal reception. 

 

The maximum transmitting range in open air is 330-feet (100 meters).  

 

Obstacles such as walls, windows, stucco, concrete, and large metal objects can 

reduce the range. 

 

For best WWVB reception, orientate the forecast station with the front of the 

back facing Ft. Collins Colorado. 

 

Distance/Resistance/Interference 

 

Distance:  

 

The maximum transmitting range in open air is over 330-feet (100 meters) 

between the outdoor transmitter and the forecast station. 

 

Consider what is in the signal path between the forecast station and the 

transmitter. 

 

Consider the distance the forecast station is located away from other electronic 

in the home. 

Содержание WS-9057U-IT















Отзывы: