La Crosse Technology WS-9043U, Инструкция по эксплуатации

Страница: 13 / 19

13
3. The record is now reset and will show the current time in the TIME LCD and current outdoor
temperature, humidity, heat index or dew point in the OUTDOOR LCD.
V. MOON PHASE
There are 12 moon phases shown on the indoor weather station. Thus, when the moon icon is all white,
it is a full moon.
New Moon Full Moon
Small Waxing Crescent Large Waning Gibbous
Large Waxing Crescent Small Waning Gibbous
First Quarter Last Quarter
Small Waxing Gibbous Large Waning Crescent
Large Waxing Gibbous Small Waning Crescent
VI. TIME ALARM
To set the time alarm:
1. Press and hold the ALM/+ button for 3 seconds.
2. The alarm time will begin to flash in the DATE LCD.
3. Press and release the IN/HR button to adjust the hour.
Note: When in the 12-hour mode and setting an alarm for a time between noon and midnight,
“PM” will appear to the left of the alarm time in the DATE LCD.
4. Press and release the OUT/MIN button to adjust the minutes.
5. Press and release the SNOOZE/CH button to confirm the setting or wait for 15 seconds and
the display will automatically return to the normal mode.
To activate the alarm:
1. Press and release the ALM/+ button to toggle between the alarm time and the day and date.
2. When the alarm time and alarm icon are showing in the DATE LCD the alarm is activated.
3. When the day and date are showing in the DATE LCD the alarm is deactivated.
To activate the snooze:
1. While the alarm is sounding press and release the SNOOZE/CH button.
2. The snooze will be activated and the alarm will come back on after the selected time period.
VII. ADDING REMOTE TEMPERATURE/HUMIDITY SENSORS (OPTIONAL)
The WS-9043U is able to receive signals from 3 different remote temperature/humidity sensors. The
remote temperature/humidity sensor model(s) that you choose will come with their own set of
instructions—follow these instructions for a complete guide to setting up. Following are some brief