Note:
When the 433 MHz signal is received correctly, do not re-open the battery cover of either the
outdoor temperature transmitter or atomic clock, as the batteries may spring free from the
contacts and force a false reset. Should this happen accidentally then reset all units (see
Setting
up
above) otherwise transmission problems may occur.
The maximum transmission range is 330 feet (100 meters) from the outdoor temperature
transmitter to the atomic clock (in open space). However, this depends on the surrounding
environment and interference levels. If no reception is possible despite the observation of these
factors, all system units have to be reset (see
Setting up
).
CHANGING THE DISPLAY MODE
(SECONDS,TEMPERATURES AND HUMIDITY)
There are four possible display modes to view the seconds, temperatures and humidity.
The
indoor humidity, indoor temperature and outdoor temperature display is the default (factory)
setting.
To change the display:
1. Press and release the + key. The display should now show the
seconds, indoor temperature
and outdoor temperature.
2. Press and release the + key a second time. The display will now show the
indoor humidity,
seconds and outdoor temperature.
11
