Note:
Turn off the radio-controlled time feature only if you DO NOT want the clock to
automatically update itself.
LANGUAGE SETTING
The weekdays can be displayed in LCD2 with the pre-set languages: US English (ENG), French
(FRA) and Spanish (ESP).
1.
LAN
will be displayed in the lower LCD along with one of the three letter language
abbreviations.
2.
Press and release the
+
key to select the desired language.
3.
Press and release the
SET
key to confirm the language setting and enter the Manual Time
setting mode.
MANUAL TIME SETTING
In case the atomic clock is not able to detect the WWVB-signal (disturbances, transmitting
distance, etc.), the time can be manually set. The clock will then work as a normal Quartz clock.
Note
: In 12-hour mode the time will be displayed with an additional
“
PM
”
for the time from 12:00
noon until 11:59.
1.
The hour digits will start flashing in the upper LCD.
2.
Select the desired hours by pressing and releasing the
+
key.
3.
Press and release the
SET
key to advance to the minutes setting.
4.
Now the minute digits will start flashing.
5.
Select the desired minutes by pressing and releasing the
+
key. If the
+
key is held, the
units will increase by 5.
6.
Press and release the
SET
key to confirm the Time setting and continue to the Year setting.
Note:
The unit will still try to receive the signal every day despite it being manually set. When it does
receive the signal, it will change the manually set time into the received time. During reception
attempts the WWVB tower icon will flash. If reception has been unsuccessful, then the WWVB
tower icon will not appear but reception will still be attempted the following hour.
7
