ATOMIC CLOCK LCD SCREEN DESCRIPTIONS
The atomic clock's LCD is divided into 2 sections and once the batteries are inserted, all the
segments will light up briefly before displaying the information for time, date, indoor and outdoor
temperatures and indoor humidity.
MANUAL SETTINGS
Indoor humidity and
temperature
WWVB time
Radio reception icon
Outdoor temperature
Weekday
Date
Alarm icon
Month
Moon Phase
Note:
If the atomic clock has already successfully received the WWVB time signal and displays
the correct time and date, then the Manual settings can be skipped
.
After completion of the above described procedures in “
Setting up”
the manual setting modes
can be entered by pressing and holding the
SET
key for 5 seconds. The following settings can
now be programmed:
Default
(Factory)
Setting
LCD
contrast
setting
4
•
4
