background image

 

25

2)

 

Current surrounding temperatures are outside measuring 
range. 

Problem: 

No reception of WWVB signal. 

Solution: 

1)

 

It may help reception to face the front of the temperature 
clock in the general direction of Ft. Collins, Colorado. 

2)

 

Wait overnight for signal. 

3)

 

Be sure the temperature clock is at least 6 feet from any 
electrical devices, i.e. TV sets, computers, or other radio 
controlled clocks. 

4)

 

Remove batteries for five minutes, reinsert and leave the unit 
alone overnight without pressing buttons. 

5)

 

If problems persist contact La Crosse Technology. 

Problem: 

Hour is incorrect (minute and date are correct). 

Solution: 

Be sure correct time zone and daylight saving time are selected. 

Problem: 

“--.-” appears in outdoor temperature LCD 

Solution: 

1) Check batteries in the remote temperature sensor. 
If batteries are replaced in remote temperature sensor the 
temperature clock must be re-started. 
Remove all batteries, and then follow start up procedure. 

Problem: 

“OFL” appears in the outdoor temperature LCD 

Solution: 

5)

 

Remote temperature is out of range. 

6)

 

Check batteries. 

7)

 

Interference from an outside source (cordless telephone, etc.) 

8)

 

Contact La Crosse Technology. 

 

Note: For any questions not answered, contact La Crosse Technology with the contact 
information found at the end of this instructional manual. 
 
SPECIFICATIONS FOR WS-8011UM 
Temperature:

 

Measuring range: 

32

F to 122

F with 0.2

F resolution (indoor) 

-21.8

F to 140

F with 0.2

F resolution (outdoor) 

(0

C to 50

C with 0.1

C resolution) 

Checking intervals: 

Every 10 seconds indoor, 3 times in 10 minutes 
for remote temperature. 

Power source:

 

Battery type: 

Station: 2 x AA, 1.5V (Alkaline)  
Transmitter: 2 x AA, 1.5V (Alkaline) 

Battery life: 

Approximately 12 months 

Dimensions (L x W x H): 

11.4 x 0.98 x 7.5 in (290 x 25 x 190mm) 

 
 
 
 
 

 

26

WARRANTY INFORMATION 
 

La Crosse Technology provides a 1-year warranty on this temperature clock.  Contact 
La Crosse Technology immediately upon discovery of any defects covered by this 
warranty. 
 
Before sending the temperature clock in for repairs, contact La Crosse Technology.  The 
temperature clock will be repaired or replaced with the same or similar model. 
 
This warranty does not cover any defects resulting from improper use, unauthorized 
repairs, faulty batteries, or the clocks inability to receive a signal due to any source of 
interference. 
 
LA CROSSE TECHNOLOGY WILL NOT ASSUME LIABILITY FOR INCIDENTAL, 
CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED 
WITH THE OPERATION OR MALFUNCTION OF THIS TEMPERATURE CLOCK.  
THIS PRODUCT IS NOT TO BE USED FOR MEDICAL PURPOSES OR FOR 
PUBLIC INFORMATION.  THIS PRODUCT IS NOT A TOY.  KEEP OUT OF 
CHILDRENS’ REACH. 
 
This warranty gives you specific legal rights.  You may also have other rights specific to 
your State.  Some States do not allow the exclusion of consequential or incidental 
damages; therefore the above exclusion of limitation may not apply to you. 
 
For warranty work, technical support, or information contact: 
 

La Crosse Technology, Ltd 

2809 Losey Blvd. S.  

La Crosse, WI 54601 
Phone: 608.782.1610 

Fax: 608.796.1020 

e-mail: 

[email protected]

 

(warranty work) 

[email protected]

 

(information on other products) 

web: 

www.lacrossetechnology.com

 

 

FCC ID: OMO-01RX (receiver) 

OMO-01TX (transmitter) 

 

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.  OPERATION IS SUBJECT TO 
THE FOLLOWING TWO CONDITIONS: 
 
1.  THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND 
2.  THIS DEVICE MUST ACCEPT INTERFERENCE RECEIVED, INCLUDING INTERFERENCE 
THAT MAY CAUSE UNDESIRED OPERATION

.

 

Содержание WS-8011UM














Отзывы: