20
5.
Remove screws from the mounting surface.
6.
Align the mounting bracket with the started screw holes.
7.
Screw mounting bracket onto the mounting surface. The
screws should be flush with the bracket.
8.
Fit the mounting post (on the back of the remote
thermo/hygro sensor) into the receptor of the mounting
bracket.
B.
Mounting With Adhesive Tape
1.
With a nonabrasive solution, clean and dry the back of
the mounting bracket and the mounting surface to ensure
a secure hold. The mounting surface should be smooth
and flat.
2.
Remove the protective strip from one side of the tape.
Press firmly onto the designated area on the back of the
mounting bracket.
3.
Remove the protective strip from the other side of the
tape, and situate the mounting bracket. Firmly press the
mounting bracket onto the mounting surface.
4.
Fit the mounting post into the receptor of the mounting
bracket.
