MOUNTING
Note:
Before permanently mounting ensure that the indoor weather station
is able to receive WWVB signals from the desired location. Also, extreme
and sudden changes in temperature will decrease the accuracy of the
indoor weather station. Changes in elevation will result with inaccurate
weather forecasting for the next 12 to 24 hours. These changes will require
a 12 to 24 hour wait before obtaining reliable data. To achieve a true
temperature reading, avoid mounting where direct sunlight can reach the
remote thermo/hygro sensor. We recommend that you mount the remote
thermo/hygro sensor on a North-facing wall. The transmitting range of the
remote thermo/hygro sensor is 80ft. Obstacles such as walls, concrete, and
large metal objects can reduce the range. Place both units in their desired
location and wait approximately 10 minutes before permanently mounting
to ensure that there is proper reception. The indoor weather station should
display a temperature in the OUTDOOR LCD within 4 minutes of setting
up.
I. Remote Thermo/hygro Sensor
A. Mounting With Screws
1. Remove the mounting bracket/receptor from the packaging.
2. Place the mounting bracket over the desired mounting surface.
3. Through the 2 screw holes of the bracket mark the mounting surface
with a pencil.
4. Where marked, start the screw holes using the provided screws.
5. Remove screws from the mounting surface.
6. Align the mounting bracket with the started screw holes.
20
