background image

 

14

WARRANTY INFORMATION 

 

La Crosse Technology, Ltd provides a 1-year limited warranty on this product against 
manufacturing defects in materials and workmanship. 
 
This limited warranty begins on the original date of purchase, is valid only on products 
purchased and used in North America and only to the original purchaser of this product.  
To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for 
problem determination and service procedures.  Warranty service can only be performed 
by a La Crosse Technology, Ltd authorized service center.  The original dated bill of sale 
must be presented upon request as proof of purchase to La Crosse Technology, Ltd or La 
Crosse Technology, Ltd’s authorized service center. 
 
La Crosse Technology, Ltd will repair or replace this product, at our option and at no 
charge as stipulated herein, with new or reconditioned parts or products if found to be 
defective during the limited warranty period specified above.  All replaced parts and 
products become the property of La Crosse Technology, Ltd and must be returned to La 
Crosse Technology, Ltd.  Replacement parts and products assume the remaining original 
warranty, or ninety (90) days, whichever is longer.  La Crosse Technology, Ltd will pay 
all expenses for labor and materials for all repairs covered by this warranty.  If necessary 
repairs are not covered by this warranty, or if a product is examined which is not in need 
or repair, you will be charged for the repairs or examination.  The owner must pay any 
shipping charges incurred in getting your La Crosse Technology, Ltd product to a La 
Crosse Technology, Ltd authorized service center.  La Crosse Technology, Ltd will pay 
reasonable return shipping charges to the owner of the product. 
 

Your La Crosse Technology, Ltd warranty covers all defects in material and workmanship with the 
following specified exceptions: (1) damage caused by accident, unreasonable use or neglect 
(including the lack of reasonable and necessary maintenance); (2) damage occurring during shipment 
(claims must be presented to the carrier); (3) damage to, or deterioration of, any accessory or 
decorative surface; (4) damage resulting from failure to follow instructions contained in your 
owner’s manual; (5) damage resulting from the performance of repairs or alterations by someone 
other than an authorized La Crosse Technology, Ltd authorized service center; (6) units used for 
other than home use (7) applications and uses that this product was not intended or (8) the products 
inability to receive a signal due to any source of interference..  This warranty covers only actual 
defects within the product itself, and does not cover the cost of installation or removal from a fixed 
installation, normal set-up or adjustments, claims based on misrepresentation by the seller or 
performance variations resulting from installation-related circumstances. 

 
LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR 
INCIDENTAL, CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES 
ASSOCIATED WITH THE OPERATION OR MALFUNCTION OF THIS PRODUCT.  
THIS PRODUCT IS NOT TO BE USED FOR MEDICAL PURPOSES OR FOR 
PUBLIC INFORMATION.  THIS PRODUCT IS NOT A TOY.  KEEP OUT OF 
CHILDREN’S REACH. 
 
This warranty gives you specific legal rights.  You may also have other rights specific to 
your State.  Some States do no allow the exclusion of consequential or incidental 
damages therefore the above exclusion of limitation may not apply to you. 
 
 
 
 

Содержание WS-6002U
















Отзывы: