37
Note:
It will take 5 minutes for the factory reset process. During this period,
the text “Factory Reset In Progress” will be shown. After the reset
process is finished, the LCD will switch off and the text “Remove
Battery” will be displayed. Remove the battery and perform system
start again. See “3 - Putting into Operation” paragraph.
Leaving the basic settings procedure (Setup Mode) with
٭
EXIT
٭
.
5
Display of stored Min/Max Values and Alarm Value
Settings
Named values are in each case upon recall being simultaneously
displayed and flashing in their respective display sections.
To recall named measuring and alarm values the menu shown below
will have to be activated by touching the Touch Screen in the center of
the text display section (last two lines at the bottom of the LCD). The
display of the values is started by touching the displays
٭
MINMAX
٭
or
٭
ALARMS
٭
.
The continuance of the recalling process is essentially self-
explanatory.
With
٭
MINMAX
٭
the below shown menu step is activated, which in
return leads to the displays of the stored Min/Max values by use of
٭
MIN
٭
/
٭
MAX
٭
resp., which on their part again can be directly
selected.
Note:
During individual displays of the stored Min/Max values the top
line of the LCD screen will automatically display the time and
date of their storage.
