28
2.
Press and hold the
SET
key for about 2 seconds. The temperature digit will
start flashing. Press the
+
or
MIN/MAX
key to set the high outdoor temp alarm
value. (Keep holding the key will allow the value to increase faster.)
3.
Press the
ALARM
key to confirm the setting. The digit will stop flashing. Press
the
SET
key to switch on or off the alarm. (The showing of the icon (((
)))
means that the alarm is switched on.)
4.
Press the
ALARM
key once. The Low Outdoor Temperature alarm display will
be shown.
5.
Press and hold the
SET
key for about 2 seconds. The temperature digit will
start flashing. Press the
+
or
MIN/MAX
key to set the low outdoor temp alarm
value. (Keep holding the key will allow the value to increase faster.)
6.
Press the
ALARM
key to confirm the setting. The digit will stop flashing. Press
the
SET
key to switch on or off the alarm. (The showing of the icon (((
)))
means that the alarm is switched on.)
7.
Press the
HISTORY
key or wait for about 30 seconds and the display will
return to normal display mode automatically.
In case the temperature value meets the condition for high alarm or low alarm, the
value will be blinking, along with the corresponding icon ("HI AL"/ "LO AL").
And the buzzer will ring for 2 minutes. User then may press any key to stop the ring.
User may quit the alarm setting and return to the normal display mode by pressing the
HISTORY
key.
Содержание WS-1610TWC-IT
