background image

15 

 

Wind Direction 

 

Wind Direction is set to North during setup. Failure to set the wind direction or mount the wind sensor facing north will 
result in incorrect wind direction readings.  If your wind direction is incorrect, follow the instructions in step 6 of the “

Setup 

Instructions Step-by-step

” to reset the direction. 

 
With the wind icon flashing, press and release the SET button to change the wind display to view wind direction as  letters 
(N, S, E, W) or degrees of direction (22.5º). The arrow within the compass rose indicates the direction. 
 
Wind Speed, Wind Gust, Wind Chill 
 

 

Wind Speed

 is “sampled” every 11 seconds. The current wind speed viewed on the display is the 

average

 wind 

speed over the past 10 minutes. 

 

Wind Gust

 is “sampled” every 11 seconds. These readings are sent to the weather station every 33 seconds as 

current wind gust. You may find the wind gust helpful for readings updated more often than the 10 minute average 
wind speed. 

 

Wind Chill

 is a combination of wind speed and the outdoor temperature recorded by the wind sensor.   

 
Select Wind Speed Unit: km/h, mph, m/s or knots 
 
With the wind icon flashing, hold the SET

 

button to set the wind speed units in: 

 

 

 

km/h (kilometers per hour) 

 

mph (miles per hour) 

 

m/s (meters per second)  

 

knots 

 
Wind MAX/MIN 
 
The weather station records the maximum wind speed and wind gusts collected during the day. Alerts for wind speed and 
wind gust may be programmed.  
 

View:

 With the wind icon flashing, press and release the MEMORY button to view: 

 

Current average wind speed 

 

Daily maximum wind speed 

 

Gust speed 

 

Daily maximum gust speed 

Reset: 

With the wind icon flashing, 

hold

 the MEMORY button to reset all wind statistics. 

 

Set Wind Alerts 

 
The weather station provides the option to set 

Wind Speed Hi alert

 and 

Wind Gust Hi alert

.

 

To set alerts: 
1.  With the wind icon flashing, press ALARM/CHART button to select the desired alarm. 
2. 

Hold

 the ALARM/CHART button until the wind alert and corresponding icon flash.  

3.  Set the alert using UP or DOWN arrow button.  
4.  Press and hold either button for fast digits advance. 
5.  Press ALARM/CHART button to confirm your selection and return to the wind alert selection screen. 
Disable the Wind Alert 

 

 

To disable wind alert when it is displayed after pressing ALARM/CHART button, press the UP or DOWN arrow button 
until the wind alert reads 

OFF.

 

 

Note:

 The wind speed alert is set at 5 mph default and the wind gust alert is set to 7 mph default to prevent false alerts 

from small fluctuations. 
 

Backlight Options 

 

Содержание WS-1517























Отзывы: