background image

 

22

during the limited warranty period specified above.  All replaced parts and products become 
the property of La Crosse Technology, Ltd and must be returned to La Crosse Technology, 
Ltd.  Replacement parts and products assume the remaining original warranty, or ninety (90) 
days, whichever is longer.  La Crosse Technology, Ltd will pay all expenses for labor and 
materials for all repairs covered by this warranty.  If necessary repairs are not covered by this 
warranty, or if a product is examined which is not in need or repair, you will be charged for 
the repairs or examination.  The owner must pay any shipping charges incurred in getting your 
La Crosse Technology, Ltd product to a La Crosse Technology, Ltd authorized service center.  
La Crosse Technology, Ltd will pay ground return shipping charges to the owner of the 
product to a USA address only. 

 

Your La Crosse Technology, Ltd warranty covers all defects in material and workmanship 
with the following specified exceptions: (1) damage caused by accident, unreasonable use or 
neglect (including the lack of reasonable and necessary maintenance); (2) damage occurring 
during shipment (claims must be presented to the carrier); (3) damage to, or deterioration of, 
any accessory or decorative surface; (4) damage resulting from failure to follow instructions 
contained in your owner’s manual; (5) damage resulting from the performance of repairs or 
alterations by someone other than an authorized La Crosse Technology, Ltd authorized 
service center; (6) units used for other than home use (7) applications and uses that this 
product was not intended or (8) the products inability to receive a signal due to any source of 
interference..  This warranty covers only actual defects within the product itself, and does not 
cover the cost of installation or removal from a fixed installation, normal set-up or 
adjustments, claims based on misrepresentation by the seller or performance variations 
resulting from installation-related circumstances. 

 

LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR 
INCIDENTAL, CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES 
ASSOCIATED WITH THE OPERATION OR MALFUNCTION OF THIS PRODUCT.  
THIS PRODUCT IS NOT TO BE USED FOR MEDICAL PURPOSES OR FOR PUBLIC 
INFORMATION.  THIS PRODUCT IS NOT A TOY.  KEEP OUT OF CHILDREN’S 
REACH. 

 

This warranty gives you specific legal rights.  You may also have other rights specific to your 
State.  Some States do no allow the exclusion of consequential or incidental damages 
therefore the above exclusion of limitation may not apply to you. 

 

For warranty work, technical support, or information contact: 

 

La Crosse Technology, Ltd 

2809 Losey Blvd. S.  

La Crosse, WI 54601 

Phone: 608-782-1610 

Fax: 608-796-1020  

 

Содержание TX2000 Discovery
























Отзывы: