Model: T83646v2
www.lacrossetechnology.com/support
Page | 5
Setup with Multiple Remote Sensors.
The weather station will accommodate up to three remote sensors
(TX141TH-ACH).
Press the
+
button to easily see the temperature in various locations:
outdoors, baby’s room, greenhouse, basement, etc. Monitor remote
temperature in up to 3 locations within a 300 ft. wireless range of the
weather station.
To connect multiple remote sensors to the weather station:
1. Remove the battery cover from all the sensors
(Leave battery covers off until all sensors are
received by the weather station).
2. Set the
first
remote sensor to Channel 1 and insert 2AA batteries.
3. Set the
second
remote sensor to Channel 2 and insert 2AA batteries.
4. Set the
third
remote sensor to Channel 3 and insert 2AA batteries.
5. Hold the
INFO
button on the weather station for 5 seconds.
The weather station will search for all remote sensors.
6. Press the TX button on each remote sensor to transmit RF
signal.
7. When RF connection is established, the temperature & humidity for
each of the selected channels will appear on the main unit.
8. Allow the sensors and the weather station to stay 5-10 feet apart for
15 minutes to establish a solid connection.
9. Install the battery covers on each sensor.
10. After 15 minutes place the remote sensors in appropriate locations.
Press and release the
+
button to view channel 1, 2 or 3 on the weather
station when multiple sensors are used.
Note:
If only one sensor is connected, the other channels will show
dashes for temperature and humidity.
Temperature/Humidity Trend Indicators
Temperature (2°F/1°C) and Humidity (5% RH) trend indicators update
about every 30 minutes.
Temperature has
risen
in the past 3 hours.
Humidity has
risen
in the past 3 hours.
Temperature has
not changed
in the past 3 hours.
Humidity has
not changed
in the past 3 hours.
Temperature has
fallen
in the past 3 hours.
Humidity has
fallen
in the past 3 hours.
