Model: T83646v2
www.lacrossetechnology.com/support
Page | 2
Get Started
Step 1:
Insert 2
new
Alkaline AA batteries (not included) into the
TX141TH-ACH
remote sensor. Observe the correct polarity. The red LED will
flash during transmission.
Step 2:
Insert 2
new
AA Alkaline batteries (not included) into the weather
station. Observe the correct polarity.
Restart:
If there is no remote temperature data after 3 minutes, remove batteries
from the weather station and the remote sensor, then press any button 20 times.
After 15 minutes, return to
Step 1
above.
Set Time, Date, Temperature Unit
1. Hold the
SETTINGS
button to enter time set mode.
2. Press the
-
or
+
buttons to adjust the values.
3. Press the
SETTINGS
button to confirm adjustments and move to the
next item.
Time setting order:
1. Beep ON/OFF
2. 12/24 hour time format
3. Hour
4. Minutes
5. Year
6. Month
7. Date
Note:
Weekday will set automatically with year, month& date.
8. Fahrenheit/Celsius
9. Month/Day or Day/Month format (M-D)
Press the
SETTINGS
button to exit, or wait 10 seconds without pressing
buttons to return to the normal time display.
Set Indoor and Remote Temperature/Humidity Alerts
Setting the alerts value and arming the alerts
are two separate steps.
1. Hold the
ALERTS
button for 3 seconds to
enter alert set mode. The temperature alert value will blink in set
mode.
2. Press the
-
or
+
buttons to adjust the values.
3. Press the
ALERTS
button to confirm
The alert setting order:
INDOOR HUMIDITY HI
INDOOR HUMIDITY LO
INDOOR TEMP
HI
INDOOR TEMP LO
OUTDOOR HUMIDITY HI
OUTDOOR
HUMIDITY LO
OUTDOOR TEMP HI
OUTDOOR TEMP LO
