The base station can connect up to 3 channel wireless sensor registration, the use of multiple wireless
sensor, the wireless sensor channel can not choose the same channel at the same time (a total of 1, 2, 3
channel can choose)
Press the "
" button can switch the display of different channels of outdoor temperature and humidity,
when displaying the symbol "
", will display a channel every 5 seconds automatically switch.
If the Base Station failed to receive transmission from outdoor sensor (“
- -
”display on the LCD), press and
hold
“
” button for 3 seconds to receive transmission manually. the outdoor temperature will show an
animation of the RF antenna symbol
，
the Base Station will re receive the wireless signal of the outdoor
sensor.
Note: when the wireless sensor set up different channels, the base station "OUTDOOR" also want to switch to
the same channel.
When there is no wireless sensor signal transmission on the channel, "--" will be displayed
in the channel of the base station
Manual time setting:
Press and hold down the “
” button for 2 seconds, the temperature is display either in °C to flash. Now use
“
” and “
” buttons to set the temperature unit in °C or °F.
Press “
” to confirm your setting, the barometric pressure is display either in hPa/mb to flash. Now use “
”
and “
” buttons to set the pressure unit in hPa/mb or inHg or mmHg.
Press “
” to confirm your setting, the wind speed is display either in km/h to flash. Now use “
” and “
”
buttons to set the pressure unit in km/h or Mph.
Press “
” to confirm your setting, the 12/24 hour mode display starts to flash. Now use “
” and “
”
buttons to set the correct 12/24 hour mode.
Press “
” to confirm your setting, the Time zones start to flash, Now use “
” and “
” buttons set a correct
time zone (-12 to +12).
Press “
” to confirm your setting, the Hour display starts to flash. Now use “
” and “
” buttons to set the
correct hour.
Press “
” to confirm your setting, the Minute displays starts to flash. Now use “
” and “
” buttons to set
the correct minute.
Press “
” button
to confirm your setting, the Month and Date icon display starts to flash. Now use “
” and
“
” buttons to set the date display on Month/Date or Date/Month.
Press “
” button to confirm your setting, the Year display 2017 starts to flash. Now use “
” and “
”
