8 |
P a g e
WHY DOES THE PRESSURE GRAPH BLINK?
The bar chart will constantly scroll for visual interest.
This scroll feature cannot be turned off.
•
The bar graph shows the recorded air pressure over the past
24-hours.
•
The horizontal axis shows the hours at increments of:
-24 hours, -18 hours, -12 hours, -9 hours, -6 hours, -3 hours, and 0 hours (current).
•
Each bar on the bar graph represents a value of 0.03 hPa
•
The “0h” on the horizontal axis indicates the current hour, thus the current air pressure also.
Reading the bar graph:
•
If the bars are rising (higher on the right than the left) then the air pressure has a rising trend,
and the weather should improve.
•
If the bars are dropping (lower on the right than the left) then the air pressure has a falling
trend, and the weather should worsen.
DOES THIS STATION HAVE A BACKLIGHT?
Yes, your color station has a backlight with 5 levels of intensity (OFF, 1, 2, 3, 4). Power cord use
is required for this station to receive updates from the sensors.
•
Press and release the LIGHT button to adjust the backlight intensity or to turn it off.
•
Intensity levels: 0% (OFF) | 1.5% | 20% | 50% | 100%
WHAT IS AUTO DIM BACKLIGHT?
Color Station:
AUTO DIM allows you to set a time for your backlight to dim to level 1 and then return to level 5.
This is a handy feature to dim the backlight at the same time every night for sleep.
Set Auto Dim (Hour only).
1.
Hold the LIGHT button 2 seconds to enter dimmer set mode. AUTO DIM OFF will show.
2.
Press the + or – buttons to turn dimmer (ON). AUTO DIM ON will show.
3.
Press the LIGHT button to select start time (Hour) for dimmer. START TIME and the hour will
flash.
4.
Press the + or – buttons to change the hour for the dimmer to be low light level.
5.
Press the LIGHT button to select start time for dimmer to be on High light level.
STOP TIME and the hour will flash.
6.
Press the + or – buttons to change the hour for the dimmer to be high light level.
7.
Press the LIGHT button to confirm exit.
While Auto Dim is active:
•
Press and release the LIGHT button to adjust the backlight for 10 seconds. Intensity Levels:
0FF | 1.5% | 20% | 50% | 100%.
