background image

Model: LTV-TH1

DC: 083017

Thermo-hygro Sensor

Power & Mounting

1. Install 2-AA batteries according to polarity and replace battery cover. The blue LED light will flash 

   when transmitting.

Mounting:

1. Use the hole at the top to hang your sensor from the back using a nail. Or, insert one mounting screw 

   through the front of your sensor.

2. Mount your sensor on a north-facing wall or in any shaded area. Under an eave or deck rail is 

    preferred to avoid inaccurate readings from the sun. 

3. The maximum wireless transmission range to the weather station is up to 400 feet (121 meters) in open 

     air, not including walls or floors.

4. Be sure your sensor is mounted vertically, to allow moisture to drain out properly.

Note: 

Watch sensor mounting video: 

http://bit.ly/TH_SensorMounting

Hole for 

mounting

LED Light

AA

+

-

AA

+

-

Battery Cover

TX

∙ Press TX to

 send a signal

TX

Отзывы: