7
1.
Remove the cover at the back of the Weather Station.
2.
Insert batteries observing the correct polarity (see
marking).
3. Replace
compartment
cover.
INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE SENSOR
The temperature sensor uses 2 x AA, IEC LR6, 1.5V Alkaline
battery. To install and replace the batteries, please follow the steps
below:
1.
Pull out the battery holder at the bottom of the sensor.
2.
Insert the batteries, observing the correct polarity (see
marking).
3.
Replace the battery holder on the unit.
Note:
In the event of changing batteries in any of the units, all units need to be reset by following
the setting up procedures. This is because a random security code is assigned by the
