22
POSITIONING THE TEMPERATURE SENSOR:
The sensor is supplied with a holder that may be attached to a wall
with the two screws supplied. The sensor can also be position on a
flat surface by securing the stand to the bottom to the sensor.
To wall mount:
1. Secure the bracket onto a desired wall using the screws and plastic
anchors.
2. Clip
the
sensor onto the bracket.
Note:
Before permanently fixing the sensor wall base, place all units in the desired locations to
check that the outdoor temperature reading is receivable. In event that the signal is not
received, relocate the sensors or move them slightly as this may help the signal reception.
