background image

La Crosse Technology 

Page 8 

 

  Choose a location 6 feet or more from electronics such as cordless phones, gaming systems, 

televisions, microwaves, routers, baby monitors, etc., which can prevent signal reception.  

  Be aware of electrical wires and plumbing within a wall. 

  Best reception is achieved when the front or the back of the Temperature Station is facing the 

outdoor transmitter. This allows a larger portion of the antenna to receive a signal.  
 

Position the Outdoor Transmitter 

 
Once the Temperature Station shows the outdoor temperature, place it and the transmitter in the desired 
locations and wait approximately 1 hour before permanently mounting the transmitter to ensure that there 
is proper reception. The transmitter should be mounted vertically, in a shaded, protected area, at least 6 
feet from the ground to avoid damage and ensure accurate readings. The transmitter is water resistant, 
not waterproof and should not be placed anywhere it will become submerged in water or subject to 
standing water or snow. Choose a location for the transmitter that is within range of the Temperature 
Station and under an overhang for accuracy. 

 
Option 1: 

  Install one mounting screw (included) into a wall leaving approximately ½ of an inch 

(12.7mm) extended. 

  Place the transmitter onto the screw using the hanging hole on the backside. 

  Gently pull the transmitter down to lock the screw into place.  

 
Option 2:    

  Insert the mounting screw through the front of the transmitter and into the wall.  

  Tighten the screw to snug (do not over tighten). 

 
To achieve a true temperature reading, mount where direct sunlight cannot reach the outdoor  transmitter. 
Mount the outdoor transmitter on a North-facing wall or in any well shaded area. Under an eave or deck 
rail work well. The maximum transmitting range in open air is over 200 feet (60 meters). Obstacles such 
as walls, windows, stucco, concrete, and large metal objects can reduce the range. Place the transmitter 
at least 6 feet in the air to improve signal transmission. 
 

Specifications

 

 

Indoor 
 
Temperature Range:  

 

+32°F to +122°F (0°C to 50°C) 

Interval:  

 

 

About every 30 seconds 

 
Outdoor 
 
Temperature Range:  

 

-40°F to 140°F (-40°C to 60°C) 

Distance: 

 

 

Over 200 feet (60 meters) RF 433MHz (open air) 

Interval:  

 

 

About every 50 seconds 

 
Power 
 
Temperature Station:       

2-AA, IEC, LR6 batteries (not included) 

TX141-A Transmitter:      

2-AA, IEC, LR6 batteries (not included) 

 
Battery Life  

 

 

 
TX141-A Transmitter 
Battery Life:  

 

 

Battery life is over 24 months when using reputable battery brands. 

 
Temperature Station  
Battery Life:      

 

Battery life is over 24 months when using reputable battery brands. 

 
 
 

Содержание K84322











Отзывы: