La Crosse Technology
Page 3
Features
•
Calendar (Month/date, 2000-2099 Default Year 2012)
•
Time (hour/minute)
•
Indoor Temperature
•
Indoor Temperature Trend
•
Wireless Outdoor Temperature
•
Outdoor Temperature Trend
•
°F/°C selectable
•
Alarm and Snooze Function
•
Large 2 inch Outdoor Temperature numbers
•
Low Battery indicator for Outdoor Sensor and Station
•
MIN/MAX Daily Records with auto reset (0:00)
•
High/Low Temperature Alert for Outdoor Temperature
•
High/Low/Off Backlight option
•
Sensor Signal Strength
•
Sits on desktop or tabletop
Setup Instructions Step-by-Step
STEP 1:
•
Slide the battery cover tab down and pull out to remove the battery cover.
•
Insert two new AA batteries (not included) into the back of the Temperature Station. Observe the
correct polarity (see marking inside the battery compartment).
•
The Temperature Station will light up and show, indoor temperature.
•
Do Not Mix Old and New Batteries
•
Do Not Mix Alkaline, Standard, Lithium or Rechargeable Batteries
STEP 2:
•
Ensure that the transmitter is within 10 feet of the Temperature Station.
•
Remove battery cover from TX141-A transmitter. Slide the battery cover down and lift off the front of
the transmitter.
•
Insert two new AA batteries into the transmitter. Observe the correct polarity.
•
Within three minutes the Temperature Station will show readings in the outdoor temperature area on
the LCD.
Note:
Allow the Temperature Station and the transmitter to stay within 10 feet of each other for the first
15 minutes of set up.
Troubleshooting
After the batteries are inserted, the Temperature Station will search for the outdoor temperature
transmitter for 3 minutes.
The antenna symbol
will flash during reception, and temperature display will be dashes “---“.
No antenna symbol will show during RF (radio frequency) synchronization.
If synchronization fails once, the antenna will lose one bar.
If synchronization fails twice, the antenna will lose two bars.
If RF (radio frequency) reception fails five times, the antenna symbol will show:
The antenna will show full display with successful RF (radio frequency) reception.
Search for Transmitter
If the outdoor temperature is not displayed after three minutes, hold the SENSOR SEARCH button on
the temperature station for three seconds to search for outdoor transmitter.
Next remove the battery cover from the TX141-A transmitter then press the
TX button to send a signal.
If it still does not receive the outdoor temperature, remove the batteries from
both the temperature station and the transmitter for 15 minutes repeat setup
instructions from step 1.
The maximum transmitting range in open air is over 200 feet (60 meters). Obstacles such as walls,
windows, stucco, concrete and large metal objects can reduce the range.
