IMPORTANT SETUP & OPERATION NOTES
•
The sensor has a wireless range of 200 feet (60.96 m). The
200 ft. range equates to open air with no obstructions, and
that radio waves DO NOT curve around objects. Actual
transmission range will vary depending on what is in the path
of the signal. Each obstruction (roof, walls, floors, ceilings,
etc.) will effectively cut signal range in half.
•
Metal, stucco, and some types of glass can reduce signal
range by as much as ¾ or more, compared to the ½
reduction typical of most obstructions. It is possible to
receive a signal through these materials, however maximum
range will be reduced due to their tendency to absorb or
reflect a much larger portion of the sensor’s signal.
•
The Wireless Remote Water Detector updates the water
status on the LCD every 6 seconds.
Note: The new measurement is reported to your account at
intervals that you select using your online account.
BATTERY REPLACEMENT
1. Remove the battery cover by sliding the cover down.
2. Observing the correct polarity install 2-AAA batteries.
Batteries will fit tightly. Avoid start-up problems by
making sure the batteries do not spring free.
3. Do not mix old and new batteries.
4. Do not mix alkaline, lithium, standard or rechargeable
batteries.
5. Replace the battery cover by sliding upwards and check that
it is securely fitted.
LOW BATTERY INDICATOR
•
Low battery icon appears on LCD when batteries are low.
•
You will receive an e-mail or mobile text message alert when
the battery power of the sensor is low. Change the batteries
immediately.
Note: The LED light turns ON briefly after changing batteries.
The LED light turns OFF when not needed to save battery
power. The previously stored information in the sensor will not
be affected or cancelled while you change the batteries.
MAINTENANCE AND CARE
•
Avoid extreme temperatures, vibration and shock.
•
Clean the sensor with a soft, damp cloth.
Do not use solvents or scouring agents.
•
Do not submerge the sensor case in water.
•
Do not kink the 6 ft. sensor cable.
•
Secure the 6 ft. cable to avoid tripping hazards.
•
Immediately remove all low powered batteries to avoid
leakage and damage.
•
Opening the casings invalidates the warranty. Do not try to
repair the unit. Contact La Crosse Technology® for repairs.
SPECIFICATIONS
Transmission range:
200 feet (60.96 m) in open space
Water status (H20/DRY):
6 ft. detachable water sensor cable
detects wet (H20) and dry (DRY)
conditions. Displays last reading on
LCD if probe is not connected.
Sensor battery power
2 x AAA Alkaline, IEC LR03, 1.5V
Battery life cycle:
Approximately 24 months
TX71U-IT size:
5.23" H x 0.76" W x 1.44" D
D000.105 H20 Sensor size
.26” H x 1.77" W x 1.17" D
WARRANTY INFORMATION
La Crosse Technology, Ltd provides a 1-year limited warranty
on this product against manufacturing defects in materials and
workmanship.
This limited warranty begins on the original date of purchase, is
valid only on products purchased and used in North America
and only to the original purchaser of this product. To receive
warranty service, the purchaser must contact La Crosse
Technology, Ltd for problem determination and service
procedures. Warranty service can only be performed by a La
Crosse Technology, Ltd authorized service center. The
original dated bill of sale must be presented upon request as
proof of purchase to La Crosse Technology, Ltd or La Crosse
Technology, Ltd’s authorized service center.
La Crosse Technology, Ltd will repair or replace this product,
at our option and at no charge as stipulated herein, with new or
reconditioned parts or products if found to be defective during
the limited warranty period specified above. All replaced parts
and products become the property of La Crosse Technology,
Ltd and must be returned to La Crosse Technology, Ltd.
Replacement parts and products assume the remaining
original warranty, or ninety (90) days, whichever is longer. La
Crosse Technology, Ltd will pay all expenses for labor and
materials for all repairs covered by this warranty. If necessary
repairs are not covered by this warranty, or if a product is
examined which is not in need or repair, you will be charged for
the repairs or examination. The owner must pay any shipping
charges incurred in getting your La Crosse Technology, Ltd
product to a La Crosse Technology, Ltd authorized service
center. La Crosse Technology, Ltd will pay ground return
shipping charges to the owner of the product to a USA address
only.
Your La Crosse Technology, Ltd warranty covers all defects in
material and workmanship with the following specified
exceptions: (1) damage caused by accident, unreasonable use
or neglect (including the lack of reasonable and necessary
maintenance); (2) damage occurring during shipment (claims
must be presented to the carrier); (3) damage to, or
deterioration of, any accessory or decorative surface; (4)
damage resulting from failure to follow instructions contained in
your owner’s manual; (5) damage resulting from the
performance of repairs or alterations by someone other than
an authorized La Crosse Technology, Ltd authorized service
center; (6) units used for other than home use (7) applications
and uses that this product was not intended or (8) the products
inability to receive a signal due to any source of interference..
This warranty covers only actual defects within the product
itself, and does not cover the cost of installation or removal
from a fixed installation, normal set-up or adjustments, claims
based on misrepresentation by the seller or performance
variations resulting from installation-related circumstances.