3
damage and ensure accurate readings. The transmitter is water
resistant, not waterproof and should not be placed anywhere it will
become submerged in water or subject to standing water or snow.
Choose a location for the transmitter that is within range of the
Temperature Station and under an overhang for
accuracy.
Option 1:
Install one mounting screw (not included) into a wall
leaving approximately ½ of an inch (12.7mm)
extended.
Place the transmitter onto the screw, using the
hanging hole on the backside.
Gently pull the transmitter down to lock the screw into
place.
Option 2:
Insert the mounting screw (not included) through the front of the
transmitter and into the wall.
Tighten the screw to snug (do not over tighten).
To achieve a true temperature reading, mount where direct sunlight
cannot reach the outdoor transmitter. Mount the outdoor transmitter on
a North-facing wall or in any well shaded area. Under an eave or deck
rail work well. The maximum transmitting range in open air is over 200-
feet (60 meters). Obstacles such as walls, windows, stucco, concrete,
and large metal objects can reduce the range. Place the transmitter at
least 6 feet in the air to improve signal transmission.
CARE AND MAINTENANCE:
Do Not Mix Old and New Batteries
Do Not Mix Alkaline, Standard, Lithium or Rechargeable
Batteries
Do not expose the Temperature Station to extreme temperatures,
vibration or shock.
Keep Temperature Station dry.
Clean Temperature Station with a soft damp cloth. Do not use
solvents or scouring agents.
The Temperature Station is not a toy. Keep it out of reach of children.
The Temperature Station is not to be used for medical purpose or for
public information, but is determined for home use only.
The specifications of this Temperature Station may change without
prior notice.
Improper use or unauthorized opening of housing will void the
warranty.
SPECIFICATIONS:
Indoor
:
Temperature Range:
0°C to 50°C (+32°F to +122°F)
Interval:
About every 30 seconds
Outdoor
:
Temperature Range:
-40°C to 60°C (-40°F to 140°F)
Distance:
Over 200 ft. (60 meters)
RF 433MHz (open air)
Interval:
About every 50 seconds
Power:
Temperature Station:
2-AA, IEC, LR6 batteries (not included)
TX141-A Transmitter:
2-AA, IEC, LR6 batteries (not included)
Battery Life:
TX141-A Transmitter
Battery Life:
Battery life is over 24 months when
using reputable battery brands.
Temperature Station
Battery Life:
Battery life is over 24 months when
using reputable battery brands.
Dimensions:
Temperature Station:
108 x 38 x 99 mm
(
4.27”L x 1.48”W x 3.88”H)
TX141-A
Transmitter:
40 x 20 x 130 mm
(1.57" L x 0.79" W x 5.12" H)
Warranty Information
Limited Warranty:
Springfield warrants this instrument to be free from
defects in workmanship and material for a period of 1 year from date of
purchase, and will repair or replace it at our option, without charge.
Please call 1-800-661-6721
For Warranty Service:
Springfield Instruments Canada
Warranty
5151 Thimens Blvd
St Laurent, Quebec H4R 2C8
Canada Statement
This device complies with Industry Canada RSS-210. Operation is
subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the
device.
Product Registration:
www.lacrossetechnology.com/support/register
Online at:
www.lacrossetechnology.com/ca85169
Protected under U.S. Patents:
5,978,738
6,076,044
6,597,990
FCC Statement
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This device must not be co-located or operating in conjunction with any
other antenna or transmitter.
Operation is subject to the following
two conditions:
