La Crosse Technology C86286, Часто задаваемые вопросы

Страница: 3 / 5

La Crosse Technology, Ltd Page 3

Check that the Time Zone selected correctly reflects your location. Adjust the
time zone in the Program Menu.

Check that the DST indicator is correct for your location (On this clock, please
change the DST setting to OFF unless you live in Arizona). Adjust the DST
indicator in the Program Menu.

Large buildings, metal roofed buildings and buildings or rooms full of electrical
and/or radio equipment make it difficult to receive the WWVB time signal.
Daylight Saving Time

Dependent on your location, position of the clock in your home, and atmospheric
interference, it may take up to 5 nights for the change from Daylight Savings
Time to Standard Time and vice-versa to occur.

Check for a WWVB Tower Icon showing on the atomic digital clock. The tower
icon indicates you have received the WWVB signal from Ft Collins CO in the past
24 hours.

Check that the clock is in the correct Time Zone .

Check whether the DST indicator is ON or OFF. On this clock, please change the
DST setting to OFF unless you live in Arizona.

Check for fresh batteries . Without proper batteries, the antenna will have a
harder time picking up the signal.

Position the digital clock in a window (with the front or back) facing Ft. Collins,
Colorado and leave for up to five nights. If you do not have a window facing this
direction, position the clock near an outside wall and point the unit in this
general direction.
Different Information Displayed

This clock offers three different display modes.

Press and release the MODE button to select different modes.
1. Weekday, Month, Date
2. Day, Month, Date, Indoor Temperature
3. Day, Month, Date, Indoor Temperature
Manually Set Time/Date: Program Menu
1. Hold the MODE button for five seconds to enter settings mode.
2. ENGLISH will show for language. Press the + or – button if you want ESPANOL.
3. Press MODE to select BEEP ON/OFF.
4. BEEP ON will show. Press the + or – button to select BEEP OFF and silence the
beep when buttons are pressed.
5. Press MODE to select ATOMIC ON/OFF.
6. ATOMIC ON will show. Press the + or – button to select ATOMIC OFF if you do
not want the atomic time signal.
NOTE: If ATOMIC OFF is selected, you will skip Time Zone and DST settings and
move 12/24 hour time.
7. Press MODE to select Time Zone.
8. ZONE EST will show. Press the + or – button to select a different time zone.