La Crosse Technology, Ltd
Page 2
A minimum voltage of 1.48V for each battery is necessary for proper
performance.
Use batteries dated at least six years in advance of the current year. Batteries
dated earlier than six years from now may still work, but may be unstable in
performance.
Good name brand batteries make less noise, which reduces the chance of RF
(radio frequency) interference from the battery compartment.
Digital Clock Factory Restart
Explanation: The factory restart returns the digital clock to an “out-of-the-box”
state and often resolves an issue.
Factory Restart:
1.
Remove all batteries from the digital clock.
2.
Press one of the buttons on the digital clock at least 20 times to clear all
memory.
3.
Verify that the digital clock is blank before proceeding (some lines are painted
on and will not disappear).
4.
Leave without power for 15 minutes (very important).
5.
Insert fresh Alkaline batteries into the digital clock.
6.
Do not press buttons for 15 minutes.
Fahrenheit/Celsius
Use the
to select Fahrenheit or Celsius temperature display.
12-Hour or 24-Hour Time Format
Display the time in 12-hour or 24-hour format
Default is 12-hour time
Use the
Supported Time Zones
This clock has 7 Time Zones: AST = Atlantic, EST =Eastern, CST =Central,
MST =Mountain, PST = Pacific, AKT = Alaska & HAT = Hawaii
The digital clock works in North America.
Outside of North America, the digital clock will not receive a WWVB signal, but
will keep time like a quartz clock.
How do I change Language?
This clock will display weekday and month in English or Spanish.
Use the
Does the clock have a backlight?
No, as this clock is battery operated there is no backlight.
Time is off by hours
Check to see if the
Tower icon appears on the atomic digital clock. If not,
the digital clock has not received a WWVB time signal in the past 24 hours.
Reposition the digital clock with the front or back facing Colorado.
