La Crosse Technology, Ltd. www.lacrossetechnology.com/support
Page 9
Weather Station
Power Requirements
This weather station is powered by a 5 volt AC power adapter
Alternatively, optional 3-AAA alkaline batteries may be used.
12-Hour or 24-Hour time format
Time can display in 12-hour (am, pm) or 24-hour format.
Default is 12-hour time.
to switch time formats.
Fahrenheit/Celsius
to switch between Fahrenheit and Celsius.
Indoor Comfort Level Indicator
The indoor comfort display is based off the humidity read by the weather station.
The weather station will display one of five indicators:
Too DRY (1-24%)
DRY (25-39%)
Comfort OK (40-70%)
Wet (71-80%)
Too Wet (81-97%)
Backlight
AC adapter:
The backlight is on continuously when operating the weather station with the
5-volt AC adapter.
Note:
When the AC adapter is NOT in use, the HI-LOW-OFF light feature is not available.
HIGH:
The backlight is defaulted to HI at setup when the AC adapter is in use.
LOW:
Press the HI-LOW-OFF button to dim the backlight.
OFF:
Press the HI-LOW-OFF button again to turn the backlight off.
Press the HI-LOW-OFF button to return to full strength.
Note:
When the backlight is off, press any button to activate the backlight for 10 seconds.
Battery power:
When operating on battery power only,
press and release the any button
and the backlight will show for 10 seconds.
Dashes, HH.H, LL.L or stuck Indoor Temperature/Humidity
Explanation:
These symbols are error messages indication the indoor sensor is outside of
its readable range. For indoor readings, this is generally a power related issue.
Check that the AC power cord is inserted into a working outlet.
may be overpowered or underpowered. Remove batteries from the weather
station.
Press any button 20 times. Leave the weather station unpowered for 1-2 hours.
Install fresh Alkaline batteries with correct polarity.
If the indoor temperature is still shows dashes, HH.H or LL.L, the weather station may
need replacement.
Inaccurate Indoor Temperature Reading
