La Crosse Technology WS-8120U-IT, Faq

Page: 1 / 7

La Crosse Technology, Ltd. Page 1
WS-8120U-IT FAQS
The links below will work in most PDF viewers and link to the topic area by clicking
the link. We recommend Adobe Reader version 10 or greater available at:
http://get.adobe.com/reader
CONTENTS
WS-8120U-It FAQS
............................................................................................................ 1
Clock Factory Restart
............................................................................................................. 1
Outdoor Temperature Transmitter
............................................................................... 2
Compatible Outdoor Transmitters
.................................................................................... 2
Fahrenheit/Celsius
.............................................................................................................. 2
Dashes shown for Outdoor Temperature
........................................................................ 2
Inaccurate Outdoor Temperature Reading
..................................................................... 3
Intermittent Outdoor Temperature
.................................................................................. 3
MIN/MAX Temperature readings
...................................................................................... 3
Sensor Stop Mode
............................................................................................................... 4
Outdoor Transmitter Fell and No Longer Works
............................................................ 4
Mounting/Positioning Outdoor Transmitter
.................................................................... 4
Distance/Resistance/Interference
.................................................................................... 5
Clock
........................................................................................................................................ 5
Power Requirements
.......................................................................................................... 5
Does the Clock Have a Backlight?
................................................................................... 5
Manual Set Time
................................................................................................................. 6
Clock goes blank in low light
............................................................................................ 6
Inaccurate Indoor Temperature Reading
........................................................................ 7
Clock Has Distorted Display
.............................................................................................. 7
Clock Factory Restart

Note: If using Alkaline Rechargeable battery place solar panel under light
source for 6 hours with rechargeable battery in place to charge.

For best results please bring the outdoor sensor in the house and place 5 feet
from the display unit.

Remove the battery from clock. Place switch to Battery mode. Do not
attempt to remove batteries from solar sensor.

With the power source removed, press one of the buttons on the display at
least 20 times to clear all stored power. Please do this even if the display is
blank to remove any remaining power. Verify the display is blank.

Place the display face down on a clean cloth to prevent the solar panel from
providing power.