La Crosse Technology, Ltd.
Page 5
A/C CORD
: The projection will continuously display if the a/c cord is attached correctly and
the projection is turned on.
Check that the a/c cord attached properly. Line up the cord and push it in the clock.
Once you are sure it is in correctly,
remove the batteries
. If the display goes blank, the
a/c cord needs adjustment.
Check that the outlet or power strip has power.
IMPORTANT:
When operating on a/c power,
the backlight, projection and USB charging
port
will turn off while the Projection Alarm Clock searches for the WWVB signal, to avoid
interference. The backlight and projection will return after the 2-10 minute search (which occurs
during the late night or early morning hours). Then the USB charging port will resume working.
Daylight Saving Time
Dependent on your location, position of the clock in your home, and atmospheric
interference, it may take up to 5 nights for the change from Daylight Savings Time to
Standard Time and vice-versa to occur.
Tower Icon showing on your Clock. The tower icon indicates you have
received the WWVB signal from Ft Collins CO in the past 24-hours.
Check that the clock is in the correct
Check whether the DST indicator is ON or OFF. If the indicator is OFF the clock will not
change.
. Without proper batteries, the antenna will have a harder time
picking up the signal.
Position the Projection Alarm Clock in a window (
with the front or back
) facing Ft. Collins,
Colorado and leave for up to five nights. If you do not have a window facing this direction,
locate the Clock near an outside wall and point the unit in this general direction.
Manually Set Time/Date: Program Menu
The SET/°F/°C button will move through the program menu. The +/PROJ ON/OFF or -/TIME
SEARCH buttons will change a value.
WWVB ON/OFF
: Hold the SET/°F/°C button 5 seconds and
WWVB
and the word
ON
will
flash. Press and release the +/PROJ ON/OFF or -/TIME SEARCH button to turn this to OFF
if you do not wish WWVB reception. Confirm with the SET/°F/°C button and move to the
next item.
TIME ZONE: EST
will flash. Press and release the +/PROJ ON/OFF or -/TIME SEARCH
button to select a different Time Zone: AST=Atlantic, EST= Eastern, CST= Central, MST=
Mountain, PST= Pacific, AKT= Alaska, HAT=Hawaiian time zone. Confirm with the
SET/°F/°C button and move to the next item.
DAYLIGHT SAVING TIME: DST
will flash and the word
ON
. Press and release the +/PROJ
ON/OFF or -/TIME SEARCH button to turn this to OFF if you do not observe DST. Confirm
with the SET/°F/°C button and move to the next item.
12/24 HOUR TIME:
1
2Hr
will flash. Press and release the +/PROJ ON/OFF or -/TIME
SEARCH button to select 24Hr. Confirm with the SET/°F/°C button and move to the next
item.
HOUR:
The
hour
will flash. Press and release the +/PROJ ON/OFF or -/TIME SEARCH
button to select the correct hour. Confirm with the SET/°F/°C button and move to the next
item.
MINUTES:
The
minutes
will flash. Press and release the +/PROJ ON/OFF or -/TIME
SEARCH button to select the correct minutes. Confirm with the SET/°F/°C button and move
to the next item.
