Model: 513-1311OTN www.lacrossetechnology.com/support Page | 4
Outdoor Temperature Alert
•
Hold the
ALERT
button for 3 seconds to enter
high
alert
setting.
•
Press the
+ or -
button to select the high alert value.
•
Press the
ALERT
button to enter
low alert
setting.
•
Press the
+ or -
button to select the low alert value.
•
Press and release the
ALERT
button to confirm and
exit.
•
Press the
ALERT
button to turn the outdoor temperature alert OFF
or ON.
Outdoor Temperature Search
•
Hold the
SEARCH
button to search for the
outdoor sensor.
•
The outdoor reception icon will flash while
searching.
Reset Button
•
If the clock display appears distorted or is not responding to buttons,
use a pen or paperclip to press
RESET
one time.
•
This will reset the clock to default settings.
WWVB Radio-controlled Time
•
Hold the
- °C/°F
button to search for the WWVB time signal.
•
WWVB Icon will flash when searching.
For information about WWVB visit:
www.nist.gov/pml/div688/grp40/wwvb.cfm
ATOMIC SIGNAL SEARCH:
The atomic clock will search for 1 hour between midnight and 6am until
the WWVB time signal is received. After reception, the atomic clock will
only search for the atomic signal after midnight.
Position Outdoor Sensor
•
Mount the outdoor sensor on a north-facing wall or in any well
shaded area. Under an eave or deck rail is preferred.
•
The maximum transmitting range to the wireless thermometer is
over 330 feet (100 meters) in open air, not including walls.
High
Alert
Icon
Low
Alert
Icon
WWVB
Atomic Icon
Outdoor
Reception
Icon