Model: 513-1311OTN www.lacrossetechnology.com/support Page | 2
KW9177T Sensor
D1: Transmission Indication LED
D2: Outdoor Temperature
D3: Battery Compartment
D4: Wall Mount Hole
Get Started
Step 1:
Insert 3 new “C” batteries (not included) into the clock.
Observe the correct polarity.
Step 2:
Insert 2 new “AAA” batteries into the outdoor sensor. Observe
correct polarity. The red LED will flash when transmitting.
Step 3:
After 5 minutes place sensor outside in a shaded location.
Set Time, Calendar, DST Indicator
•
Hold the
MODE/SET
button to enter the setting mode.
•
Press the
+
or
–
buttons to adjust a value.
•
Press the
MODE/SET
button to confirm adjustment and move to the
next item.
Setting order:
1. Hour, 2. Minutes, 3. Seconds, 4. Year, 5. Month/Date format (M/D or
D/M), 6. Month, 7. Date, 8. DST indicator
Note:
The clock will default back to time display if no buttons are pressed
for 30 seconds.
Fahrenheit/Celsius Selection
Press the
- °C/°F
button to change the temperature display from
Fahrenheit to Celsius.
Battery Compartment
2-“AAA” batteries
D5: “RESET” button
D6: °C/°F” button
D7: Stand
