La Crosse Technology 513-1311OT, Часто задаваемые вопросы

Страница: 3 / 10

La Crosse Technology, Ltd Page 3
Outdoor Temperature Sensor
Compatible Outdoor Sensors

The KW5012FSK outdoor sensor (915MHz) comes packaged with this clock and is the only
compatible sensor.
Fahrenheit/Celsius

Digital Atomic Clock : Hold the -/°C/°F button on the back of the clock for 5 seconds to
switch the temperature display from Fahrenheit to Celsius.

KW5012FSK Transmitter : Press the °C/°F button under the battery cover to switch the
sensor temperature display from Fahrenheit to Celsius
Flashing Outdoor Temperature

The outdoor Temperature reading will flash when the connection is first lost or intermittent
between the clock and the outdoor sensor.

Distance/Resistance is generally the cause of intermittent connection or loss of connection
between the sensor and the clock.

Check the position of the clock. Turn the clock 90 degrees towards the outdoor sensor for
better reception.

Try the quick connect or factory restart .

Batteries often resolve the connection issue.
Dashes shown for Outdoor Temperature

Dashes means the connection is lost between the clock and the outdoor sensor.

This sensor reads down to
–4 °F. when the temperature is below that, the outdoor
temperature can show OFL, HH.H, dashes or stick at a number.

Batteries often resolve the connection.

Distance/Resistance can cause loss of connection between the sensor and the clock.

Reorientation of the clock 90 degrees towards the outdoor sensor may provide better
reception.

Try the quick connect or factory restart .
Quick Connect

Bring the sensor and clock together inside and have both units 5-10 feet apart with nothing
between them.

Hold the SEARCH button on the clock for 5 seconds until the Temperature area starts to
flash.

Remove battery cover and press and release the TX button to send the signal.

Wait for 2 minutes for the outdoor Temperature to appear.

Factory Restart: If the above procedure does not work, please try the factory reset.
Inaccurate Outdoor Temperature Reading

When the sensor reads high during the day but not at night it is a positioning problem.

Side-by-side test: Bring the outdoor sensor in the house and place it next to the clock for 2
hours.