La Crosse Technology, Ltd. www.lacrossetechnology.com/support
Page 13
•
When the alarm sounds, press the HI/LOW/OFF
button to snooze the alarm for
10 minutes.
•
The snooze option can repeat three times.
•
The alarm icon will flash while the snooze feature is active.
•
Note:
while the alarm sounds press any button
except
the ALARM button to
turn the alarm off.
No WWVB Tower Icon
•
The forecast station has not received a WWVB time signal in the past 24-hours.
•
Position
the forecast station for better reception.
•
Be sure you have good batteries in the forecast station.
•
Hold the + and
–
buttons together to send the forecast station on a signal search
at night.
•
Allow up to 5 nights to receive the time signal.
Time is off by hours
Tower icon appears on the forecast station. If not, the
forecast station has not received a WWVB time signal in the past 24-hours.
Reposition the forecast station with the front or back facing Colorado.
Check that the Time Zone selected correctly reflects your location. Adjust the time zone
in the
Check that the DST indicator is correct for your location (most areas observe DST so this
should be ON). Adjust the DST indicator in the
Manually Set Time/Date: Program Menu
The TIME SET button will move through the program menu. To change a value use the
ARROW buttons.
1.
WWVB ON/OFF: Hold the TIME SET button five seconds so
WWVB
and the word
ON
will flash. Press and release either ARROW button to turn this to OFF if you do
not wish WWVB time reception. Confirm with the TIME SET button and move to
time zone.
2.
TIME ZONE:
EST
will flash. Press and release
the ▲ or ▼ buttons
to select a
different Time Zone: AST=Atlantic, EST= Eastern, CST= Central, MST= Mountain,
PST= Pacific, AKT= Alaska, HAT=Hawaiian time zone. Confirm with the TIME SET
button and move to DST.
3.
DAYLIGHT SAVING TIME:
DST
will flash and the word
ON
. Press and release the
▲ or ▼ buttons
to turn this to OFF if you do not observe DST. Confirm with the
TIME SET button and move to 12/24 hour time.
4.
12/24 HOUR TIME:
12H
will flash. Press and release
the ▲ or ▼ buttons
to select
24H. Confirm with the TIME SET button and move to the hour.