La Crosse Technology, Ltd. www.lacrossetechnology.com/support
Page 10
•
Do not mount the outdoor sensor on a metal fence. This significantly reduces the
effective range.
Interference:
•
Consider items in the signal path between the outdoor sensor and the weather
station.
•
Sometimes a simple relocation of the outdoor sensor or the weather station will
correct the interference.
•
Windows can reflect the radio signal.
•
Metal will absorb the RF (radio frequency) signal.
•
Stucco has a metal mesh that absorbs signal.
•
Avoid transmitting antennas: (ham radios, emergency dispatch centers, airports,
military bases, etc.)
•
Electrical wires (utilities, cable, etc.)
•
Vegetation is full of moisture and reduces signal.
•
It is difficult for RF (radio frequency) signal to travel through a hill.
Temperature Alerts
Explanation:
The outdoor and indoor temperature alerts are set in two separate steps.
•
Set the alert value.
•
Arm/Disarm the alert.
Select Temperature Alert Values:
Hold the ALERT button for five seconds to select and set temperature alert values.
1.
OUTDOOR HI
alert will flash. Press the
▲ or ▼
buttons to set the alert value, and
press the ALERT button to confirm. Then press the ALERT button again switch to
OUTDOOR LO setting.
2.
OUTDOOR LO
alert will flash. Press
the ▲ or ▼ buttons
to set the alert value, and
press the ALERT button to confirm. Then press the ALERT button again switch to
INDOOR HI setting.
3.
INDOOR HI
alert will flash. P
ress the ▲ or ▼ buttons to set
the value, and press
the ALERT button to confirm and switch to INDOOR LO.
4.
INDOOR LO
alert will flash. Press
the ▲ or ▼ buttons
to set the alert value, and
press the ALERT button to confirm. Then press the ALERT button again confirm and
exit.
Note:
After selecting temperature alert values, use the next step to arm or disarm
individual alerts.
Temperature Alerts ON/OFF
•
In normal mode, hold then release the ALERT button to toggle between:
o
Outdoor HI
o
Outdoor LO
o
Indoor HI
o
Indoor LO