La Boite Concept LX PLATINE, Уведомление/Руководство пользователя

Страница: 75 / 88

6. The LX will automatically go into standby mode if you leave your device without signal for 30
minutes. The standby LED light will turn red. To wake up the device, press the control knob or
play music from either sources.
7. To temporarily put the LX into “off” mode and avoid power consumption, turn the volume
control knob counter clockwise to the “OFF” point until you hear a “click” sound.
8. To fully switch the LX off, switch the master ON/OFF at the back of the loudspeaker (please
refer to the drawing on page 61). All the LED lights are now off and the USB power discon-
nects. .
3 . CHOOSING YOUR SOURCE
Once you have set up your connections on the input panel, you can select the source you want
to use by pressing the corresponding button on the control panel (from 1 to 7).
/ Selecting the source corresponds to (1) the Bluetooth connection with your devices.
/ Selecting the source corresponds to (2) the Bluetooth pairing with your devices.
/ Selecting the source corresponds to (3) the AUX input.
/ Selecting the source corresponds to (4) the Phono or RCA inputs provided
to connect your vinyl turntable. This source is linked to the RCA/Phono button located on the
input panel.
75
RCA mode: for a line level input (CD, DVD, …) or to use if
your turntable is pre-amplified.
RCA mode: to use with the cable with the two audio ends
(one RCA end and one stereo 3,5mm end) provided.
Phono mode: if your turntable is not pre-amplified (tradition-
al turntable with a ground output).