L3 Systems KeyAT, Руководство пользователя

Страница: 2 / 42

Quick Reference
Description Cmd Notes
ASCII transfer* ~A Negates binary transfer (~B)
Binary transfer ~B Use only with ~K or ~S
Set to character mode* ~C Send ASCII chars
ASCII hex mode ~H Send Hex ASCII chars
Keyboard code mode ~K Send direct key codes
DOS scan code mode ~S Send DOS scan codes
Reset/Enable
Commands ~~~~~~~
~~~ 10 ~ does reset if commands on, if
not, it enables commands
Turn off Commands ~@ Turn off commands (~anything)
Send scan code ~:nn Sends scan code nn
Scan code Key down ~+nn Sends key down, scan code nn
Scan code key up ~-nn Sends key up, scan code nn
Immediate turn around ~I Data interpreted as received, non-
addressed mode only
Line turn around* ~L Data buffered until enter or <CR>
Monitor ON ~M Monitor keyboard, key codes
Qwerty Monitor ON ~Q Monitor keyboard, ASCII
Monitor off* ~N Turn off keyboard monitoring
Display ON/OFF LEDs ~Dnn Sets keyboard LED status to nn
Transfer to keyboard ~Xnn Sends nn to keyboard
Status request ~? Response = AA- EELLDBTM
Sleep ~Znn Sleeps nn seconds
Set turnaround delay ~Pnn Sets turnaround to nn milli-sec
Send CR mode ~F Sends <CR> through
Re-assign ASCII code ~Gaaxx Sets char aa to use scan code xx
Re-map ASCII Chars ~Raa112
2b1122 Re-maps ASCII characters aa and
bb as 1122
**Test Mode ~T KeyAT test
EEPROM Read ~ERnn Read EEPROM string #nn
EEPROM Write ~EWnn Write EEPROM string #nn
EEPROM Execute ~EEnn Execute EEPROM string #nn
*default setting **Available only with KeyAT-2 with EEPROM