L3 Nova Engineering NovaRoam MH902, Руководство пользователя

Страница: 22 / 24

Wireless Tab
The Wireless Tab provides the following statistical information regarding the wireless performance of the
NovaRoam.
•
Bytes received. Total number of bytes successfully received by the NovaRoam’s wireless
interface.
•
Packets received. Total number of packets successfully received by the NovaRoam’s wireless
interface.
•
Received packets dropped. Total number of packets received by the NovaRoam’s wireless
interface that failed the validation check for problems such as a corrupted CRC.
•
Packets received with bad length. Total number of packets received by the NovaRoam’s
wireless interface that contained checksum errors involving length.
•
Packets received with bad CRC. Total number of packets received by the NovaRoam’s
wireless interface that contained checksum errors.
•
Bytes transmitted. Total number of bytes transmitted over the NovaRoam’s wireless interface.
•
Packets transmitted. Total number of packets transmitted over the NovaRoam’s wireless
interface.
•
Packets repeated. Number of repeated packet transmissions. If a transmission fails to receive a
confirmation of successful reception, the packet is retransmitted.
Batt Status Tab
The Batt Status Tab provides the following statistical information regarding the battery performance when
a battery is connected to the NovaRoam.
•
Battery Monitoring. Indicates whether Battery Monitoring has been activated. Battery
Monitoring is enabled by placing a checkmark next to the Enable Battery Testing option, which
is located on the Serial Mode tab of the Interfaces configuration page.
•
AC Power. 1 = ON, 0 = OFF
•
Charge status. 0 = ON, 1 = OFF
•
Battery failure. 0 = ON, 1 = OFF
•
Temperature of BCS. Internal temperature of the NovaRoam, in °F.
•
Battery voltage. This value should be 12 to 13 volts unless the battery is discharging.