Stormscope
®
WX-500 User’s Guide
3-4
Chapter 3 – Operation
Error Messages
*F=Fatal, NF=Nonfatal, R=Recoverable, NR=Nonrecoverable (Description follows table.)
Table 3-1. Error Messages (Continued)
Error
Fault Source
Type*
Recommended Action
Error 23
Invalid Synchro Ref
No 400 Hz
reference
NF/R
Continue without heading
stabilization. See your dealer for
service.
Error 24
Mic Key Stuck
Mic key (inhibit
line) stuck. The
microphone key
has been
depressed for
more than 1
minute
NF/R
Check your microphone key to
correct the problem. If not
correctable, continue without
weather mapping functions and
see your dealer for service.
Errors 25 thru 34
Software Error
Main processor
F
Turn off the unit and see your
dealer for service.
Errors 35 and 36
Processor Fault
DSP or main
processor
NF/R
Continue without weather
mapping functions. See your
dealer for service.
Error 40
Processor Fault
Main processor
NF/R
See your dealer for service if
this error occurs frequently.
Error 41
Processor Fault
DSP or main
processor
F
Turn off the unit and see your
dealer for service.
Error 42
Processor Fault
Main processor
F
Turn off the unit and see your
dealer for service.
Error 43
Invalid Request
MFD
NF/R
See your dealer for service if
this error occurs frequently.
Error 44 thru 49
Serial
Communications
MFD
NF/R
See your dealer for service if
this error occurs frequently.
Error 50
Illegal Heading
Value
MFD
NF/R
See your dealer for service if
this error occurs frequently.
Error 51
Invalid Message
MFD
NF/R
See your dealer for service if
this error occurs frequently.
Error 52
Invalid Antenna
Change Request
MFD
NF/R
See your dealer for service if
this error occurs frequently.
Error 53 thru 54
Communications
Buffer Overload
MFD
NF/R
See your dealer for service if
this error occurs frequently.