STEP 1
Read through these instructions thoroughly
before beginning assembly. We have
found this to be of great value when first
assembling this product.
STEP 2
Remove all parts and hardware from
packing material. Wooden pieces should
be placed on a non-abrasive surface (like
the carton or carpet) to prevent damage to
the finish.
STEP 3
Identify all parts using diagram at right
STEP 4
Identify and count hardware using diagram
at right.
Assembly of this product requires an
adjustable wrench and Phillips
screwdriver
.
We have found it helpful to
have a second person present in at least
one step of the assembly.
STEP 5
Locate two leg sections (B) with factory-
installed nut countersunk into them.
Attach outer leg (C) to inner leg (B) by
placing outer leg (C) on top of inner leg
(B) and inserting 1 ½” machine screw with
washer, through center hole in outer leg
(C) and into the factory-installed locknut
in the center of inner leg (B).
Do not
tighten fully at this time.
This will create
a “scissor” leg assembly.
Repeat for the other leg.
