background image

 

 
 

ROUND ADIRONDACK TABLE 

 

 

 

 

 
 

Thank you for purchasing this L.L.Bean Home Round 

Adirondack Table.  Assembly of this product requires a 

7/16” wrench or an adjustable wrench, and Phillips 

screwdriver.  We have found it helpful to have a second 

person assist with assembly. 

 
 
930 

0PH48090130 

Содержание ROUND ADIRONDACK TABLE

Страница 1: ...r purchasing this L L Bean Home Round Adirondack Table Assembly of this product requires a 7 16 wrench or an adjustable wrench and Phillips screwdriver We have found it helpful to have a second person assist with assembly 930 0PH48090130 ...

Страница 2: ...ware using diagram at right Assembly of this product requires an adjustable wrench and Phillips screwdriver We have found it helpful to have a second person present in at least one step of the assembly STEP 5 Locate two leg sections B with factory installed nut countersunk into them Attach outer leg C to inner leg B by placing outer leg C on top of inner leg B and inserting 1 machine screw with wa...

Страница 3: ...olt for B leg and use 2 carriage bolt for C leg Take care in aligning the legs on the inward side of the leg support brackets which were factory mounted to allow for the offset of the legs STEP 7 Connect the leg assemblies using leg stretchers D Insert the 1 screws through the two small predrilled holes at the base of each leg inward into the pilot holes in the ends of each leg stretcher Note You ...

Страница 4: ...se this chair on a lawn occasionally move it to a dry surface patio or deck to allow the legs to dry out A deck porch or patio is the best location for your furniture To clean wipe accumulated dirt with a solution of warm soapy water and a soft cloth rinse thoroughly with clean water Over time your Adirondack furniture will need refinishing We recommend the following Lightly sand each piece with a...

Отзывы: