1 of 4
00000050209
STEP 1
Read through these instructions thoroughly before
beginning assembly. We have found this to be of great
value when first assembling this product.
STEP 2
Remove all parts and hardware from packing material.
Wooden pieces should be placed on a non-abrasive
surface (like the carton or carpet) to prevent damage to
the finish.
STEP 3
Identify and count hardware using diagram at
right.
PARTS
STEP 4
Identify all parts using diagram at right
Assembly of this product requires a Phillips head and a
flat head screwdriver
.
We have found it helpful to have
a second person present in at least one step of the
assembly.
STEP 5
Locate the headboard panel, headboard brace, and the
two headboard posts. The headboard panel will have two
holes drilled on one side; this side is the back and the
holes are located at the top. The headboard brace will
have two holes drilled on one side; this side is the back
and the holes are located at the top.
STEP 6
Place the headboard panel and headboard brace front side
down on a flat, solid, protected surface. Position the
headboard posts on either side of the headboard panel
and brace making sure to position the side of the
headboard post with the 4 holes to face the headboard
panel and brace; the side of the headboard post with the
two smaller holes and a wood button should be face
down at this point
