Hardened Media Converter
10
One-Channel Media Converter
Ports
The Converter provides one copper port and one fiber port. The fiber port provides
options of Multi-mode, Single-mode, or WDM Single-mode fiber using an SC
connector.
The copper port uses RJ-45 connector, auto-MDIX, and auto negotiates.
Port Settings
Port settings are made very simple by means of a DIP (Dual Inline Package) switch
on the front panel of the hardened media converter.
Default DIP switch settings:
1 2 3 4
1
0
DIP Switch
There are four pins on the DIP switch for port settings. Refer to the table below for more
details.
DIP
switch
No.
0 1
1 Disable
LFPT
Enable
LFPT
LFPT:
link-fault-
pass-through
2
Enable auto negotiation for
fiber port
Enable forced mode for fiber
port
3
Disable link down alarm for
copper port
Enable link down alarm for
copper port
4
Disable link down alarm for
fiber port
Enable link down alarm for
fiber port
